造成窗框周边漫渗的原因有结构形变，密封材料脱落，窗框周边有细小裂缝，窗框周边有空穴存在及安装误差大。那么窗体防水应该如何处理呢？
1、清理窗框周边，查找渗漏缝隙，分析渗漏原因；
Clean up the sash perimeter, find leakage gap analysis leakage causes;
2、对于墙体内部存在空穴的部位，根据具体情况考虑化学灌浆或填充其它弹性防水材料；清理缝隙表面，其表面不应有油污，浮尘等隔离物；在窗框周边缝隙内嵌填弹性密封材料；
For wall holes that exist within the site, depending on the circumstances consider chemical grouting or filling other flexible waterproof material; clean up the gap surface, the surface should not have oil, dust and other spacers; embedded in the frame to fill the gap around the elastic sealing material ;
3、试水检验防水效果，主要是在窗户的外面做防水处理，一般是墙面上批刮耐水腻子、刷防水涂料。当然，如果事先做一下基础防水的话，那么防水的效果会更好了。在室内的话，一般是不做防水处理的，因为如果外面漏水的话，在里面在防水的效果不会太理想的。但从防潮的角度来看，室内做防水处理还是有好处的，要打玻璃胶或在外面做防水。
Test the water test water effects, mainly in water treatment done outside the window, usually Scraping the wall of water putty, waterproof paint brush. Of course, if you do some basic water beforehand, then the effect will be better waterproof. In the interior, the general is not waterproof, because if word leaks out, in which the effect of the water is not too ideal. But from the perspective of moisture, interior waterproofing or do good, to fight on the outside glass, plastic or waterproof.